Three Buddy T's Creative Works stencils side by side: blue ORAMASK film, 3-mil Mylar, and 5-mil Mylar
Custom-made

Custom Stencils

Choose the material that fits your surface and your project.

Custom stencils for painting, airbrushing, tracing, drawing, sign-making, crafts, and repeatable layouts. Choose adhesive masking film for a clean limited-use result, or reusable Mylar for flexibility and longevity.

  • ORAMASK 813 adhesive masking film
  • 3-mil flexible reusable Mylar
  • 5-mil durable reusable Mylar

Find your fit

Choose Your Stencil Material

Cleanest one-time result on flat/smooth surfaces: ORAMASK 813. Reusable + flexible: 3-mil Mylar. Most durable for repeated use: 5-mil Mylar.

Cleanest limited-use result

ORAMASK 813

Thin, smooth, flexible blue plastic/vinyl film with a low-tack adhesive backing. It behaves a little like painter’s tape because it sticks directly to the surface and peels away afterward, but feels more like plastic/vinyl than paper tape.

  • About 3 mil; translucent enough to see layout marks and wood grain.
  • Sticks directly to flat wood, signs, cabinets, glass, and smooth surfaces.
  • Adhesive contact helps create crisp edges and minimal paint bleed.
  • Transfer tape included.
  • Single-use / limited-use: peeling can stretch, distort, or tear it. Not a washable reusable stencil.

How to apply ORAMASK 813

  1. Start with a clean, dry, smooth surface and position your design with the included transfer tape.
  2. Press the stencil film down carefully, then remove the transfer tape so the masking film stays on the surface.
  3. Apply light, controlled coats of a finish suitable for your surface; avoid flooding the edges.
  4. Peel away carefully at the appropriate stage for your paint or finish. Discard the used film.

Reusable + flexible

3-mil Mylar

Thin clear reusable plastic with no adhesive. A flexible everyday option for mild curves and designs you expect to use a handful of times.

  • Secure with masking tape or removable stencil adhesive as needed.
  • Washable and reusable multiple times.
  • Sits relatively close to the surface, helping with cleaner edges than thicker plastic.
  • Less durable than 5-mil; rough handling can wrinkle or tear it.

How to apply 3-mil Mylar

  1. Position on a clean surface and secure with masking tape or removable stencil adhesive suited to the project.
  2. Keep the flexible sheet flat against the surface, especially around small details.
  3. Use light paint loads and controlled passes rather than pushing paint under the edges.
  4. Lift carefully, wash gently with a cleaner suitable for your paint, and store flat when dry.

Most durable / repeated use

5-mil Mylar

Thicker, stiffer clear reusable plastic with no adhesive. Choose it when longevity, frequent reuse, and heavier handling matter most.

  • More rigid and substantially more durable than 3-mil.
  • Secure with masking tape or removable stencil adhesive.
  • Better for repeated washing and frequent reuse.
  • Conforms less tightly than thin plastic; careful paint control matters more.

How to apply 5-mil Mylar

  1. Choose a surface the stiffer sheet can sit against well; flat signs, walls, or furniture are good starting points.
  2. Secure with masking tape or removable stencil adhesive and check that edges stay close to the surface.
  3. Use a lightly loaded brush or roller; build coverage slowly to minimize edge bleed.
  4. Lift, wash with a cleaner suitable for your paint, dry, and store flat for the next use.

Sized for the work you do

Tell us your surface, design, size, and how often you expect to use it. Intricate details and floating elements are reviewed so the material and layout suit the project.